Markedstorget / / Kiesel Norge AS / Anis Trend Multi-Purpose Baler Line, single pre-press
Oppføring i Markedstorget

Anis Trend Multi-Purpose Baler Line, single pre-press

The pre-press baler line contains all the developments from ANIS »PREMIUM line« shear baler with the addition of pre-compression flaps and provides extremely heavy, homogenous and compact bales. It is equipped with the shear blades and pre-pressing with two options: Single Prepress Flap – at the rear of the feeding opening, or Double lateral Prepress Flaps – on the both sides of the feeding opening.

Highlights of PRE-COMPRESSION FLAPS

  • The material is fed into the press-box via a pre-press system to ensure optimal filling.
  • eliminate the need to cut excess material with the knives, which reduces component wear as well as the risk of shutdowns.
  • saves on spare parts and optimize bale density with significantly lower power consumption and safer and more efficient system operation.
  • The material density in the compression chamber is increased by 30%
  • No need to worry about the position and sharpness of the shear blades. Namely, a worn or improperly positioned shear blades would not cut off the material as it should, which is necessary especially for baling the plastic film.
  • Provides lower power consumption than shear balers.
  • Lower costs and easy maintenance

With the ANIS control system, the operator only needs to select the type of material grade to be processed. Once selected, the system decides whether the pre-compression flaps are required, resulting in the material being processed in the most efficient and practical way.

Working principle:

The single vertical pre-press flap in the feed opening closes before the ram finishes the press cycle. Because of this, optimal weight-homogenous, well-shaped and stackable bales are produced without the need for cutting. The single big flap absorbs the vertically occurring forces well. As a result, difficult-to-press materials can be processed as well.

Baler series with Single pre-press Flap is available with hopper sizes, feed openings and power units tailored to suit the application in hand.

  • Press ram on big wheel and HARDOX wear plates linings
  • Pressing force: 60-142 Tonnes
  • Bale size: 1.100 x 750mm, and 1.100 x 1.100 mm
  • Power units: 45kW, 55kW or 2x30kW, 75kW, 2 x 55kW
  • Feed opening length: 1.600mm
  • Pre-compression flap force: with peaks of 60 tons

Les mer her

Lignende oppføringer

Avermann kanalpresse, AVOS 1410/1411

EnviroPac Group AS

Avermann kanalpresse AVOS 1211

EnviroPac Group AS

Macpresse

Steco Miljø AS

Logg inn på Avfallsbransjen.no


Ikke abonnent ennå? Bli med nå!